Philips GEM Emerald-X2 Pick & Place Machines w/Philips LCS Automatic Tray Feeding Systems
(we have four of the Philips Emerald Line of Machines)
• 2 Super Fine Accuracy Heads
• Component Range: 01005 ~ SOP, SOJ, PLCC, QFP, BGA, _BGA, CSP, odds, connectors
• Max. Component Size: 54mm2, 45mm2 fine pitch and BGA, 32mm2 ultra fine pitch and _BGA
• Max. Component Height: 20mm (placement side)
• CPH: 6,800 chips, 400 QPP
• Accuracy: 35micron @ 3 sigma
• Min. Lead Pitch: 0.20mm
• Max. Board Size: 460mm x 440mm (18.1" x 17.3")
• Min. Board Size: 50mm x 50mm (2.0" x 2.0")
• Board Thickness: 0.4mm ~ 4.0mm (0.015" ~ 0.15")
• PCB Positioning:
- Locate pins for tooling holes
- Edge clamping system
• Alignment system:
- Line sensor camera for vision on the fly
- 32mm CCD camera for fine placement
- 45mm CCD camera for very large components
- Four lighting illumination w/ 3 lighting angles (all cameras)
- Side illumination for BGA (all cameras)
• Leaded component recognition:
- Minimum lead pitch: 0.20mm
- Recognition of pitch, location, bent/missing, and cumulative pitch
• BGA ball recognition:
- Minimum ball pitch: 0.40mm
- Minimum ball size: 0.20mm
- Total BGA ball count, size, and pitch
• Fiducial Recognition:
- White light from 3 angles
- Inferred light from 2 angles
- Separate or combined panel, single image, and component fiducial recognition
- Common and programmable patterns
- Bad mark recognition
• Tape Feeder Positions: 90 (8mm)
• Bulk/Stick feeders
• LCS External Tray Feeder
- 60 Tray holding capability
|
